Removing Table View In Microsoft Word For Mac 2016

From the page where the Table is displayed, in the ribbon, click the Page tab, and then click the Edit command. Click in the table you want to delete. In the ribbon, under Table Tools, click the Layout tab. In the Rows & Columns group, click Delete, and then in the drop-down menu, select Delete Table. If you want to change the view, do the following: 1. On the View tab, in the Current View group, click the. (items of information) are included in the view (another way to customize columns see in Add and remove columns in Outlook). For example, in the mail view. If you encountered a bug or want to suggest a feature in Microsoft Office.

This article shows how to convert an Excel “Table” Object back into a collection of rows and columns in Excel worksheet. Yes, that technique removes the colored row formatting, but it obliterates the Table object and its identity is lost. This article does NOT show how to remove formatting from an Excel “Table” Object. Check out our new Word text: Save time and increase productivity! This video illustrates how view table gridlines in Mic. Welcome To Falcon Computer Academy Microsoft office 2016/Microsoft word 2016/Table,Layout tab,insert,delete,format,formulaswatch more videos from my channelh.

This article is for versions of Word that have the Ribbon. In the unlikely event that you are still using Word 2003 or earlier, you should instead see the toolbar version of the article.

Overview

Users who have come to Word from a typewriter background are used to setting up tabular material using tabs. The very wordtab is short for tabulator, and tabulator stops on a typewriter are used in tabulation, that is, making tables. So their first impulse when they need to make a table in Word may be to use tabs.

Sometimes this is an acceptable (or occasionally, even the best) way to go. For a simple table with short entries, and very few rows, setting tab stops can be quick and easy, and Word allows you to drag them around until the text lines up where you want it. If you do use tabs to create atable, be sure you use them properly: in particular,never use the built-in tab stops; always create your own. For tips on this subject, see Setting Tabs.

Like other word processors, however, Word offers a very easy way to create tables that use true rows and columns as opposed to simply containing tabular text. Whenever your needs are less simple—for example, whenever the text in any column of your table might need to wrap to the next line, or you need vertical table borders, or your table might span more than one page and need a continuation header, or if you might ever conceivably need to change the column order—you should use Word’s built-in Table feature. Note that you can convert tabular text into a Word Table in one step, provided your tab stops were set properly, by selecting the text and using Insert | Tables | Table | Convert Text to Table.... See also Changing your mind.

Warning: Many people who are not familiar with using true Tables try to use text boxes to simulate the appearance of a table with borders, or sometimes even to draw their borders using horizontal and vertical drawing lines. Not only does this make life far more difficult than it need be during the design of the table, it also creates a maintenance nightmare, should anyone need ever need to add to, delete, or amend the data later, or to paste the table into another document. There is really no circumstance in which using text boxes or drawing lines to create tabular information is ever preferable to using a table.

Let’s look at what Word’s Table feature does.

What is a Table?

How is a Table different from a tableof tabbed text? As you know, you can arrange tabular material using tabs. For example, you can use a combination of left-, center-, decimal-, and right-aligned tab stops, in combination with horizontal paragraph borders, to create a text-based tablesuch as the following (shown with non-printing characters displayed so you can see how it was created):

Figure 1. A table created with tabs

Notice (in Figure 2) what can happen when you add some text to one of the lines, because of the lack of support for word-wrapping:

Figure 2

Selecting a single column is possible (hold the Alt key down while you drag with the mouse) but is much more difficult than if a Word Table had been used, and it is not possible to have a running header should the table span two pages.

Now suppose the tabular material is more complex. For instance, suppose you have paragraph text to be placed in side-by-side columns, as in the following example:

Figure 3

When you use tabs to create such a table, each row of the table (or sometimes the whole table) is a single paragraph. If you tried to type text such as the above using tabs (and I have actually seen this done!), you would have to break the paragraphs up into fragments that would fit on each line. If the text had to be edited, it would be a nightmare. But when you use Word’s Table feature to create a table, Word creates a cell for each intersection of a row and column. Each cell contains a separate paragraph (or can contain several paragraphs, as shown); and the text in the cell can wrap independently of the rest of the table. So whenever your tabular material contains text that must wrap to the next line, a Word table is far more satisfactory than a tabbed table.

Inserting a table

Inserting a table is easy.

On the Insert tab of the Ribbon, in the Tables group, there is a single Table button, which opens the Insert Table menu.

Figure 4. The Insert Table menu

At the top of the menu is a 10 × 8 grid. If you want a table with 10 or fewer columns and 8 or fewer rows, you can drag to select the desired number of rows and columns. Alternatively (and if you need more columns), you can choose Insert Table... from the menu, which opens the dialog shown in Figure 5. (Don’t ever select Draw Table, for the reasons discussed below under Drawing tables.)

Figure 5. The Insert Table dialog

As for the rest of the items on the menu, Excel Spreadsheet, as you might expect, inserts an Excel sheet as an OLE object. In it you can use the formulas and conditional formatting available in Excel but not (or not so easily) in Word. Quick Tables opens a gallery of preformatted sample tables including several types of monthly calendars. You may want to look at these to see whether one of them would provide a convenient starting point for your table.

Helpful Tip: If you use a lot of tables, you may want to add the Insert Table button to the Quick Access Toolbar. Unfortunately, no matter what you right-click in the Tables group, if you select Add to Quick Access Toolbar or (in the case of Word 2007) Add Group to Quick Access Toolbar, what you get will be more trouble than it's worth. Instead, you will need to add it from the Customize dialog (see instructions in the article “Customize the Quick Access Toolbar”), where you will find it in the Insert category as Table with a ScreenTip showing TableInsertGallery.

No matter how you insert the table, the number of columns is all that really matters because you can add rows to the table as you go: whenever you press Tab at the end of the last row of the table, a new row is created. For this reason I usually just create two rows, one for the table headings and another for the first row of text. If applying grid borders, it’s best to start with three rows, so that you can apply one grid to row 1 and a separate grid to rows 2–3; but you would almost never need to start with more than that.

Helpful Tip: When you first insert the table, it will have a ½-point border around the cells, creating a grid. You can remove this, if desired, by selecting the entire table and then choosing No Border on the menu accessed by clicking Borders on the contextual Table Tools | Design tab of the Ribbon. In Word 2007 and 2010, this button is in the Table Styles group; in Word 2013 and 2016, it is in the Borders group.

You will probably also be able to remove the border by pressing Alt+Ctrl+U, which runs the TableUpdateAutoFormat command.

The default table style when you start Word is called Table Grid. Even when you have removed the borders, Word still considers that this style is applied to the table, as shown in the Table Styles gallery. In actuality, what you have achieved is a style internally called Table Normal, but in Word 2007 and above this table style does not appear to be directly accessible. You can, however, use New Table Style... to create an unbordered table style (based on Table Normal) provided you give it a different name (such as My Table); you can then make it available to new documents by selecting the radio button for “New documents based on this template” in the Create New Style from Formatting dialog.

Even if you remove the border, you may still see dotted or broken lines between the table cells; these are gridlines; they are just a (very important) visual aid, and do not print. If you do not see them, select the Table Tools | Layout tab and click View Gridlines in the Table group. For more on borders and gridlines see Why don’t my table borders print? and Run for the border: using borders in Word.

Helpful Tip: Even if you don’t have table gridlines displayed, you may still see dotted cell outlines in Print Layout or Web Layout view. This will happen if you have the box for “Show text boundaries” checked under Show document content on the Advanced tab of Office Button | Word Options (Word 2007) or File | Options (Word 2010 and above).

Working in a table

You can put almost anything in a table that you can put in normal document text, and you can format table text the same way you would ordinary text paragraphs, by applying direct font and paragraph formatting or, preferably, with styles. Note that, although you can define table styles, which specify formatting of specific parts of a table (fonts, shading, and border for the header row(s), total row(s), first and last columns, odd or even rows or columns), table styles do not permit you to specify paragraph styles. Those must be applied manually. In addition, there are just a few things that work differently in tables.

Tabs

When you tab in a table, you go to the next cell (Shift+Tab takes you to the previous cell). This makes it easy to work in tables because you don’t have to use the mouse to move your insertion point. But you can still set tab stops in table cells; the trick is that you have to use Ctrl+Tab to tab to them. The exception to this rule is the decimal tab. When you set a decimal tab stop in a cell, the text aligns on it automatically (provided it is left-aligned or justified to begin with; any other paragraph alignment gives very odd results). For more on decimal and other tabs, seeSetting tabs.

Selecting text

If you’re used to selecting a line of text by clicking to the left of it or a paragraph by double-clicking to the left of it, you’ll find that you can’t do this in a table. Whenever you point to a cell and click, you select the entire cell. But you can still select text by dragging, and you can select a sentence using Ctrl+click or a paragraph by triple-clicking in it. And if you normally select text using keyboard shortcuts, these will still work.

Margins and indents

If you have the horizontal ruler displayed, you will see that it looks very different when you are working in a table. Instead of seeing indent markers at the page margins, you will see them at the sides of the space representing the table cell you are currently in. You can drag these as you normally would to set paragraph indents. You will also see margin markers on the ruler, representing the edge of each column – more on this later.

Figure 7. The ruler when the selection is in a table

Selecting parts of a table

When the insertion point is in a table, Word displays the contextual Table Tools tabs on the Ribbon. On the Table Tools | Layout tab, in the Table group, there is a Select button that opens a menu allowing you to select a cell, column, row, or the entire table, but there are also mouse shortcuts for these tasks.

  • As mentioned earlier, if you point to a cell (the mouse pointer becomes a stubby black arrow pointing northeast: ) and click, the entire cell is selected.

  • To select an entire row, point to it as you would a line of text (position the mouse pointer in the left margin until it is a white arrow pointing northeast) and then click. Or point to any cell in the row and double-click.

  • To select a column, hover the mouse over the top of the column until it becomes a stubby black arrow pointing down. Click to select the column below it; then drag to select adjacent columns. Alternatively (in Word 2007 or 2010 only), hold Shift while clicking the right (or alternate) mouse button.

  • To select noncontiguous rows or columns, pressCtrl while selecting rows or columns after the first

  • To select an entire table, in Print Layout or Web Layout view, you can click the “table handle” () at the top left corner of the table.

Warning: Be careful when clicking the handle, which is also called the “move handle” because it allows you to move the table by dragging it. When you drag it, you also make it wrapped, so, even if you mean the table to be In Line With Text, if you inadvertently nudge it just slightly when clicking on the handle, it will become wrapped, with unforeseen effects down the road. See “‘Text-wrapped’ tables and frames” for more on this subject.

Sizing rows and columns

When you first insert a table, all the columns are the same size, and all the rows are an Auto height that will accommodate the current text size. For example, if you are using the Normal style, then the row will be high enough to accommodate 11-point Calibri with (in Word 2007 and 2010) 1.15 line spacing and 10 points Spacing After or (in Word 2013 and 2016) 1.08 line spacing and 8 points Spacing After. (If your table has borders, it’s a good idea to define specific paragraph styles with different spacing from your Normal style, allowing a small amount of spacing both before and after.)

Because the row height is automatic, it will adjust to fit the amount of text you put into it, so you will not ordinarily need to change this unless you need empty rows of a fixed height. But you probably will need to change the width of the columns to accommodate the text they contain. On the Layout tab of Table Tools, there is an AutoFit button that offers the choices AutoFit Contents, AutoFit Window, and Fixed Column Width. By default, the first option is selected: that is, Word will automatically resize columns to fit the content. This can be very disconcerting and not necessarily satisfactory. Selecting Fixed Column Width allows you to adjust column widths manually. The AutoFit Window option is the equivalent of choosing 100% for the table width (on the Table tab of the Table Properties dialog) and can be helpful if your adjustments have resulted in a table that is wider or narrower than the margin width.

There are several ways to adjust column width manually.

Sizing columns using the ruler

If you click and drag the area on the ruler that represents the space between cells, you change the width of one or more of the cells. The way this change is made depends on how you drag, as follows:

  • Simple click and drag: The cell to the left of the dragged border is made wider or narrower, and the other cell widths are not changed (so the overall table width changes). Since the table is initially inserted at margin width, this means that if you make one of the cells wider, the table will extend beyond the right margin.

  • Ctrl+click and drag: The cell to the left is sized, and the difference is made up from the cells to the right uniformly. That is, if you make the cell to the left larger, all the cells to the right become proportionately smaller.

  • Shift+click and drag: The cell to the left is sized, and the difference in size is made up from the cell to the right. That is, if you make the cell to the left larger, the cell to the right becomes proportionately smaller; cells farther to the right are unaffected.

  • Alt+click and drag: Same as simple click and drag except that the ruler displays the dimensions of the cells as you drag, permitting finer adjustments.

Important Note: The measurements the ruler displays are somewhat misleading, in that they do not include the Space between columns (or cell margins).

For example, if you have a column of width 1″ (2.54cm), and if the Space between columns is set to 0.15″, or 0.38cm (the default), then the column width displayed on the ruler when you hold the Alt key down will be 0.85″ (2.16cm).

To find out the Space between columns setting using the Table Properties dialog, click the Options button on the Table tab, and add the Left and Right cell margin measurements—although that isn’t always accurate, as it displays only two decimal places. For instance, if the Space between columns is set to 0.15″, the Left and Right cell margin measurements on the Table Properties dialog both display as 0.08″ instead of 0.075″.

  • Alt+Ctrl+click and drag: Same as Ctrl+click and drag except that the ruler displays dimensions.

  • Alt+Shift+click and drag: Same as Shift+click and drag except that the ruler displays dimensions. (But see above caveat.)

Sizing columns using the cell borders

You can also size the columns by dragging directly on the cell boundaries, and this is often much easier than using the ruler—partly because the indent markers on the ruler can make it difficult to get at the margin markers. Most people also find it more intuitive to drag the columns directly.

When you hover the mouse pointer over the gridline between two columns, it will change to a double arrow (pointing right and left) with two upright parallel lines between it. When it has this appearance, you can click and drag a column boundary.

You have the same six combinations as above, but, just to be totally confusing, simple Click and drag and Shift+click and drag (and Alt+click and drag and Alt+Shift+click and drag) are reversed in their functionality.

It is possible that some users actually memorize or remember what these various combinations do, but I personally just keep trying one after the other (with Undo in between) until I get the one that does what I want!

Important Note: It is possible to change the width of a single cell independently of the column width, and it is all too easy to do this unintentionally. Pay close attention to the selection when you are sizing columns: make sure you have either the entire column or nothing selected, not one or more cells.

Sizing rows

You can also adjust row height either by using the vertical ruler or by dragging the cell boundaries, but only in Print Layout view.

Pressing Ctrl while you drag sets the row to an Exact, or fixed, height, so that if there is too much text in the cell to fit, the surplus text will be hidden (setting exact row heights is particularly useful for forms). If you don’t use the Ctrl key, the row height is set to At least the measurement you chose, so the row will expand in height if needed, to fit the text in the cell, but will not contract below the minimum height you set.

Pressing Alt while you drag causes the ruler to display dimensions—but prevents you from setting an Exact height, even with the Ctrl key held down.

Helpful Tip: It is not possible to change the height of a single cell independently of the rest of the row, but you can create the appearance of different cell heights by applying borders selectively or even by astutely splitting and merging cells. For example, suppose you want to have three equal rows in one column and four equal rows in another. Start with 12 rows, set to an Exact” height, and then merge groups of four cells in one column and three cells in the other. (For more on this, see “Merging cells.”)

Another way to size columns and rows

The Table Properties dialog allows you to set exact column widths and minimum or exact row heights. Access this dialog from the right-click shortcut menu or by clicking Properties in the Table group on the Table Tools | Layout tab. The dialog has four tabs:

Removing Table View In Microsoft Word For Mac 2016

  • On the Table tab,you can set a preferred width for the entire table; this can be set in your default measurement unit (inches, centimeters, or whatever else you have set on the General tab of Tools | Options), or you can set the Measure in dropdown to percent and set it to any percentage of the editable page width you wish. If you set it to 100%, it will always maintain full margin width, no more and no less. As noted above, you can accomplish the same thing by selecting AutoFit Window on the AutoFit menu.
    You can also click Options... to access the Table Options dialog. This is the location of (among other options) the check box for “Automatically resize to fit contents,” which is also toggled with the AutoFit Contents button on the AutoFit menu.

  • On the Row tab, you can set Auto,At least, or Exactly heights for one or more rows (the rows affected will depend on the selection).

  • On the Column tab you can set a preferred width for the current or selected column(s), although unfortunately preferred width does not mean actual width (nor does it mean Exactly” because the width you “prefer will be ignored if necessary to accommodate other columns), and setting the column width using the dialog usually gives unexpected results; dragging the columns to set their widths is generally much more reliable.

  • On the Cell tab, you can set the vertical alignment of selected cells, and the Options... button opens the Cell Options dialog, which allows you to set cell margins different from those for the rest of the table.

Even distribution

An extremely useful option is the Distribute columns evenly command. If you select two or more adjacent columns, right-click, and choose this option, the total width of the combined columns will be divided equally among them so that they are the same width. Similarly, you can select several rows and choose Distribute rows evenly.” These features are also available in the Cell Size group on the Table Tools | Layout tab.

Important Note: Even distribution is not available for noncontiguous columns.

Adding rows or columns

As you have seen, adding new rows at the end of a table is easy and automatic. But what if you want to insert rows in the middle? Or what if you have gotten too far along in your table to start from scratch when you discover you need an additional column? No problem!

When the insertion point is in a table, one of the items on the right-click shortcut menu will be Insert.This opens a submenu (as shown in Figure 8) that allows you to insert rows or columns as desired.

Figure 8. The Insert context menu

These commands (except for Insert Cells...) are also available in the Rows & Columns group on the Table Tools | Layout tab. The dialog launcher (shown circled in Figure 9) opens the Insert Cells dialog.

Figure 9. The Rows & Columns dialog launcher and Insert Cells dialog

If you select more than one row or column when using these commands, Word will insert the number of rows or columns selected. This is an easy way to insert a lot of rows at once, even at the bottom of the table. Select the last (still empty) row and choose Insert Rows; select that row and the new row and press F4 (Repeat) to insert two more rows; select the four rows and press F4 to insert four new rows; and so on.

Helpful Tip: Another way to add a new row below an existing one: position the insertion point at the end of the text in the last cell in the row. Press the Right Arrow key (not Tab). This will position the insertion point just outside the cell, to the left of the end-of-row marker (which you can see if you have nonprinting characters displayed). Press Enter, and a new row will be inserted below the existing one. To insert a new column to the right of the farthest right one, select the end-of-row markers the same way you would select a column and choose Insert Columns.

Helpful Tip for Word 2013 and above: In these versions, when you hover over the top of a column boundary or the left edge of a row boundary, you will get the special display shown below that allows you to click the + icon to add a column or row. If you have multiple columns or rows selected, an equal number of columns or rows will be inserted. (For more on this and other new Word 2013 table features, see here.)

Figure 10. Row and column insert controls in Word 2013

Deleting rows, columns, and tables

To delete a row or column, select it, right-click, and choose Delete rows or Delete columns. (You can also use Cut.) To delete an entire table, select it and either useCut (Ctrl+X) or press Backspace. If you want to do this the hard way, click the Delete button on the Table Tools | Layout tab and choose the appropriate item from the menu.

Repeating headings

If your table is longer than one page (or continues onto a second page, regardless of length), you can make your headings automatically repeat on the following page(s). You can repeat more than one row, but they must be the top rows of the table (you can’t skip any rows). Select the desired row(s) and click Repeat Header Rows in the Data group on the Table Tools | Layout tab. (There is also a check box on the Row tab of the Table Properties dialog for Repeat as header at the top of each page.)

Important Note: It is unfortunately easy to confuse the Repeat Header Rows button on the Table Tools | Layout tab with the Header Row check box in the Table Style Options group on the Table Tools | Design tab. That check box merely determines whether a row marked as a header row uses the formatting specified for header rows in the table style. As you can see, you can also opt to use or omit special formatting for total rows, banded (odd/even) rows, and so on. For more on this, see “Table styles.”

Positioning the table

If your table is less than the full margin width, you may want to indent or center it. The Table tab of the Table Properties dialog allows you to specify Left, Center, or Right alignment for the entire table (you can also select the entire table and use the Left, Center, or Right alignment buttons in the Paragraph group on the Home tab or the keyboard shortcuts Ctrl+L, Ctrl+E, and Ctrl+R). The Table tab of Table Properties also allowsyou to set a specific left indent if you choose.

Controlling text flow

You may have already learned to control page breaks in Word by using a combination of the properties on the Line and Page Breaks tab of the Paragraph dialog: Widow/Orphan control,Keep lines together,Keep with next, and Page break before. These work a little differently in tables.

“Widow/Orphan control” and “Keep lines together”

These paragraph properties have no effect in a table. There is a check box on the Row tab of the Table Properties dialog that allows you to specify whether you want to allow a soft page break within a given row (Allow row to break across pages). But if you do allow the row to break, it can break anywhere, even if the result is to leave one line of text stranded on a page. If you have more than one paragraph in a cell and would like the row to be able to break between but not within the paragraphs, you’re just out of luck.

“Keep with next”

This command does work, but only between rows. At a minimum, it should be applied to the header row(s), but it is also very useful for keeping a table together on one page. To do that, apply it to the text in every row but the last.

If you want to ensure that the first few rows of the table always stay together (so that you don’t, for instance, ever end up with only the table header row and one more row at the foot of a page) applyKeep with next to the first two or three rows.

“Page break before”

This one is quite useful. Sometimes you will want to break a table at a certain point. But if you insert a hard page break (Ctrl+Enter), the result is to split the table, and heading rows will not repeat. But you can apply the Page break before property and you will get the desired page breakand repeating headings. (You can also apply Keep with next to the preceding rows to achieve the same effect.)

Removing Table View In Microsoft Word For Mac 2016

Performance issues

The article “Maximising the performance of Word tables” was written for (much) earlier versions of Word, but much of it is still applicable today. One of the most important caveats is to avoid long single-row tables. Always start a new row whenever feasible, preferably at least once per page. Word becomes very uncomfortable and unpredictable when table rows get too long, and there is one particular result that can be disastrous:

Warning: If you insert a footnote in a table row, that footnote doesn’t necessarily appear at the bottom of the current page. Instead, it appears at the bottom of the page on which the current row ends. You may be able to live with this. Indeed, footnotes in tables are traditionally at the bottom of the table, and often it is preferable to type them manually in an unbordered last table row. But if you have numerous footnotes in a row that extends for several pages, then by the time Word gets to the page on which the row ends, there may be more footnote content than will fit on the page. In such cases, the excess footnotes are not carried over to the next page, as you might expect. Instead, they just disappear, which can be very disconcerting!

Advanced techniques

All of the above is more than enough to get you started creating basic tables, but Word allows you to do a lot of other fancy things in tables.

Merging cells

Recent versions of Word allow you to merge and split cells both horizontally and vertically. To merge cells, select the cells to be merged (combined), right-click, and choose Merge Cells (there is also a Merge Cells button in the Merge group on the Table Tools | Layout tab).

There are limitations. You cannot create an L-shaped cell. If two cells are merged vertically, then the combined cells cannot be merged horizontally with a single cell but only with the two adjacent cells. But even in earlier versions, where you cannot merge cells vertically, you can often create the appearance of merged cells by applying borders selectively.

In Word 95 and earlier, if you merged two columns, you in effect merged the two cells in each row of the two columns; in Word 97 and later, unfortunately, you merge the two entire columns into one big cell, which isn’t very helpful! You can get around this, however, by using the Eraser tool; if you use it to erase the border between two columns, the rows remain intact.

Removing Table View In Microsoft Word For Mac 2016 How To Turn Off Margins

  • In Word 2007 and 2010, the Eraser tool is inthe Draw Borders group on the Table Tools | Design tab.

  • In Word 2013 and 2010, the Eraser tool is in the Draw group on the Table Tools | Layout tab.

Merging should be approached cautiously and conservatively. Don’t merge cells horizontally until you are sure the column widths are final. The reason for this is that selecting and sizing columns is complicated by merged cells. And don’t merge cells at all if you don’t have to. If you can achieve the same effect by omitting borders, do that instead. Merging cells makes a table more complex and susceptible to corruption, which is reason enough to avoid it except when absolutely necessary.

Vertical alignment

By default Word places text at the top of a table cell (subject to any Spacing Before you have applied to the paragraph). But sometimes, as in a price list, for example, you may want to align text at the bottom of the cells. In Word 97 and earlier, you could choose Top, Center, or Bottom alignment for all the text in a given cell; this command was on the right-click shortcut menu when the insertion point was in a given cell. Later versions of Word substituted a table alignment palette that displays nine combinations of vertical and horizontal alignment, available from the shortcut menu and also in the Alignment groupon the Table Tools | Layout tab (see Figure 11).

Figure 11. Cell Alignment buttons on shortcut menu and Ribbon

The disadvantage to this palette is that it forces you to choose a combination of horizontal and vertical alignment for every selected cell. You can select a column or row and apply specific horizontal alignment (Left, Center, or Right) using the buttons in the Paragraph group on the Home tab or the keyboard shortcuts Ctrl+L, Ctrl+E, and Ctrl+R, but there is no simple way to select just the vertical alignment of multiple cells that may intentionally have different horizontal alignment. If you find that you frequently have need to do this, you can add buttons to the Quick Access Toolbar or create keyboard shortcuts for the commands. The Customize the Quick Access Toolbar dialog (under All Commands) includes the commands forAlign Bottom, Align Center, and Align Top; the Customize Keyboard (also under All Commands) calls them Bottom Align, Center Align, and Top Align. In both cases, you need to make sure these are the commands for table cells and not for drawing objects. The QAT dialog includes icons for all the commands and distinguishes between, for example, Align Top and Align Objects Top. In the Customize Keyboard dialog Align Bottom, Align Center, and Align Top are for drawing objects.

Text direction

You can rotate text in a table cell 90 degrees right or left. The text rotation is displayed only in Print Layout view and applies to all the text in the cell. This is useful when you have long headings for narrow columns. The Text Direction command is on the right-click shortcut menu when the insertion point is in a cell, as well as in the Alignment group on the Table Tools | Layout tab. When text is rotated (as shown in Figure 12), the alignment buttons are rotated accordingly, which can be a little disconcerting.

Figure 12: The Cell Alignment buttons when the selection is in a cell in which the text has been rotated

Cell margins

Space around the text in cells is achieved in several different ways.

In earlier versions of Word, the left and right cell margins were determined by the Space between columns measurement. Recent versions of Word instead have Cell margins settings that can be established as a default for the entire table or specified for individual cells. Set default cell margins for the entire table in the Table Options dialog accessed via the Options… button of the Table tab of Table Properties. Set margins for a specific cell (or selected cells) in the Cell Options dialog accessed via the Options… button on the Cell tab. You can also still use paragraph indents in cells, but this should not be necessary except when you want one paragraph indented more than the rest in a single cell.

The default setting for the Space between columns was 0.15″, or .38cm. In current versions of Word, that amount is split between left and right margins, resulting in the 0.08″ measurement displayed under Table Properties | Table | Options... if you use inches (although the true left and right margins are actually 0.075″); if you use centimeters, the measurement is displayed as 0.19cm It can be reduced to 0″ (no space between columns) or increased as desired.

This setting applies to all cells in the table, but you can increase cell padding using paragraph indents. You can also reduce the effective cell margin in a given cell by setting negative paragraph indents; this technique should be used sparingly, however, since it can have very odd results when the column width is changed.

Top and bottom margins (if any) can be created by applying Spacing Before and/or After to the paragraphs in the cell, or you can set Top and Bottom cell margins for the entire table by selecting Table Properties | Table | Options... or for individual cells with Table Properties | Cell | Options....

The Table Options dialog also includes another settingrather confusingly called Spacing between cells. This setting seems to be there for the sake of HTML compatibility (it is equivalent to HTML’s cell spacing). It creates an ugly effect whereby, instead of adding cell margins, as the cell margins settings do, it adds white space in the middle of the cell borders, splitting each border in two:

Graphics in tables

The most straightforward way to insert an image in a table is to put it in a single cell, with the text wrapping style set to In Line with Text, butyou can insertfloating imagesin table cells. Floating (or wrapped) images are those with a wrapping style other thanIn Line with Text (Picture Tools | Format | Arrange | Wrap Text). Images that have Behind Text or In Front of Text wrapping can float freely over the table without being confined within a table cell. An image with Square,Tight,Through or Top and Bottom wrapping will be confined to a cell. If the image is resized to a larger width, the table cell will adjust to accommodate it.

Having said that, though (and as discussed in the article The draw layer: a metaphysical space), it is best to use floating graphics only when they are really needed; and in long documents it is best to avoid them altogether, other than in headers or footers or on the cover page. And if you do need to use floating graphics in a table, it is usually best to ensure that their anchors are placed outside the table—see, for example, the article Floating objects in Word 2000 table cells are vertically aligned wrongly.

Nested tables

You can embed (nest) a table within a cell of a larger table (for an example, imagine the thumbnails of the previous and following months that might appear in the unused day spaces of a monthly calendar). Nested tables make a document much more complex and can slow Word documents down dramatically; moreover, the behavior of the tab key is changed.

The existence of nested tables also complicates working with ordinary tables: because you can insert tables within one another, you may see new pasting behavior when you paste tables. There are specific rules for this behavior, but in general they are pretty logical, though usually irritating in practice. To summarize, you can paste equal numbers of cells as cells, but if you try to paste several cells into a single cell, they will be pasted as a nested table. To prevent this from happening, drag and drop your cells instead of pasting them; or select Home | Clipboard | Paste | Paste Special as Formatted Text (which is the only workaround when pasting from Excel into a Word table).

Well-designed web pages would be impossible to create without nested tables, because the only way to set the width of a webpage is to put all your text (and any tables within the text) inside a fixed width table cell; but nested tables are rarely either appropriate or useful in Word: avoid them when you can.

“Text-wrapped” tables and frames

You can also turn text wrapping on by selecting Table | Properties, and setting the Text Wrapping (on the Table tab) to Around. This means you can wrap text around tables, or put two independent tables side by side. Despite appearances, such tables are notfloating (that is, they are not in the drawing layer, and they can be seen in Draft view). In fact, they are in a frame, but the frame borders are hidden when the document is opened in Word 2000 and higher. If you were to open the same document in Word 97, the frame borders would become visible.

Warning: As noted earlier, it is all too easy to switch a table’s text wrapping on inadvertently. The four-headed arrow in a box () at the top left corner of the table (in Print Layout or Web Layout view only) is the table handle or move handle.” If you click on it, you can drag the table anywhere on the page. It then becomes text-wrapped. Even if you nudge it just ever so slightly, the table becomes text-wrapped. Needless to say, you must be careful not to drag the table accidentally when selecting text in the first cell.

The lack of visibility of the frame borders in text-wrapped tables, combined with the ease with which you can accidentally turn text-wrapping on, makes for a maintenance nightmare, as it is often difficult to tell whether a table has wrapping switched on or not.

By default, text-wrapped tables can span multiple pages, which makes it even more difficult to tell whether a given table is text-wrapped or not! Fortunately, you may be able to switch off the ability to span multiple pages:

  • Word 2007: Go to Office Button | Word Options | Advanced. At the very bottom of the tab, click the + to expand the Layout Options. Check the box for “Don’t break wrapped tables across pages.

  • Word 2010: Go to File | Options | Advanced. At the very bottom of the tab, click the + to expand the Layout Options. Check the box for “Don’t break wrapped tables across pages.

If you do that in your templates, your new documents will pick up that setting. Or clearing the Move with text box in the Table Positioning dialog under Table Properties also switches off the ability of a text-wrapped table to span multiple pages.

Important Note:Unfortunately, the Don’t break wrapped tables across pages Layout Option is not available in Word 2013 and above.

Text-wrapped tables, like frames and floating objects, also add a memory overhead, slow your documents down, and increase the risk of document corruption.Using text wrapping when it’s needed is one thing, but it should never be used if not needed, and therefore the ease with which wrapping can be accidentally applied is very unfortunate.

So it is usually much better to do things the old-fashioned way, even in the latest versions, and insert a proper frame, rather than using the invisible frame that gets inserted when you turn text-wrapping on. The functionality is identical, but a visible frame makes it far easier to see what’s going on than an invisible one does; and makes for far more maintainable documents.

Helpful Tip: Microsoft has been trying for years to deprecate frames, offering as substitutes text boxes, wrapped tables, etc., even though a frame is often the best solution to a problem. Not surprisingly, therefore, Ribbon versions of Word make it unreasonably difficult to insert frames. There is an Insert Frame button in the Legacy Forms section of the Legacy Tools in the Controls group on the Developer tab, but if you find frames useful, you will want to add this button to the Quick Access Toolbar. You can find it listed as Insert Horizontal Frame in the Commands Not in the Ribbon section of the Customize the Quick Access Toolbar tab (even though it demonstrably is on the Developer tab of the Ribbon).

Tables and HTML

Most of the changes in table formatting that were introduced in Word 2000 are intended to make Word more compatible with Web documents (so that, for instance, you can paste Web documents into Word without losing any formatting); and also—a much more minority taste—to make Word more suitable for creating Web pages. Nested tables, for example, are widely used in HTML, and they persist when documents are round-tripped (saved back and forth) between document and HTML file format.

Drawing tables

One of the menu items under the Table button on the Insert tab is Draw Table, which turns on a pencil tool that allows you to draw a table. Once you have drawn a single cell, the contextual Table Tools are displayed, but the pencil tool is still enabled. In Word 2007 and 2010, the Table Tools | Design tab is displayed, with the Draw Table button turned on in the Draw Borders group. In Word 2013 and 2016, the Draw Table and Eraser buttons have been moved to a new Draw group on the Table Tools | Layout tab.

The premise of these tools is presumably that you can easily create custom-sized cells without the bother of merging or splitting. The reality is that you can easily get yourself into a whole pile of trouble, especially when you start trying to size the cells or use the Eraser; and also, if you use this tool, you will inevitably make your tables unnecessarily complex without realizing it. It actually takes a great deal of skill not to make a mess of your tables if you use the Draw Table tool. I have had to sort out the mess made by many users who have used it, and my advice about drawing tables therefore is: Don’t.

Table styles

On the contextual Table Tools | Design tab, you will find a gallery of Table Styles that can be used to gussy up your tables. The colors used in the table are all defined in terms of accent colors in the current color theme, so they will vary depending on the theme applied to a document from the Themes button (on the Page Layout tab in Word 2007 and 2010 and on the Design tab in Word 2013 and 2016).. The check boxes in the Table Style Options group determine which of the style features are applied, and the gallery thumbnails reflect those choices; some of the styles, however, don't have special formatting defined for, say, the header row or the first column, so selecting these features does not affect the display of those thumbnails. The best way to see how this works is to experiment with it yourself. Once you get the idea, you can also define a custom table style, with defined formatting for each of the table parts; choose New Table Style... at the bottom of the Table Styles gallery.

Wide tables

Occasionally you will need to create a table that is just too wide to fit between the margins of a normal portrait page. In this case you have several options:

  1. The most straightforward approach is to insert a landscape page or pages in order to make the table wider. Although this method has its drawbacks, especially if you need to preserve a portrait header and/or footer (see How can I create a landscape section and still have a portrait page number?), it’s the conventional way of tackling the problem.

  2. It may be possible to rotate the table layout, swapping headings and stubs, so that it is longer than it is wide, but this doesn’t always help if the cell text itself is wide or if this distorts the table logic.

  3. It is conceivably possible to effectively rotate the table itself, swapping headings and stubs and then rotating the text 90 degrees, but this is a gargantuan mental effort, and rotating text adds complexity to the document.

  4. If the table will not need editing, you could create it as a separate landscape document and then use Copy and Paste Special: As Picture for one page at a time. The inserted picture can then be rotated.

Needless to say, methods 2, 3, and 4 are offered in a purely academic spirit; in most cases the first one is what you will use.

Users, especially those more at home in Excel, sometimes ask whether it is possible to split a table across two portrait pages. There is no built-in way to do this in Word. You can manually set up a broadside table to spread across two facing pages, but you have to construct it by hand, and if row heights are likely to vary, you’ll need to make them all Exact so that they will match from one page to the next. Again, this requires a lot of mental effort and manual tweaking, so generally it is better to rethink the table and either divide it into two or more tables or run it broadside on a landscape page or pages.

Narrow tables

Sometimes you will have a long, narrow table that would be much more efficiently displayed in two or more columns. There is no reason not to do this. It is generally easier if you set up the column formatting before inserting the table so that the inserted table will be the width of the column rather than the full margin width.

You can create a multi-column section manually, by inserting section breaks and then applying the desired column formatting to each section, but you can also get Word to do the work for you. At the end of the text preceding the multi-column section, press Enter twice to create two empty paragraphs. Select the first one and use Page Layout | Page Setup | Columns to select two or more columns. Word will insert the necessary Continuous section breaks above and below this paragraph, where you can now insert your table.

Helpful Tip: Because you have a Continuous section break at the end of the multi-column section, Word will automatically “balance” the columns. This can be distracting when you are creating the table because every time you add a row, the table shifts from one column to another. In Word 2007 and 2010, you can get around this by (at least temporarily) checking the box for “Don’t balance columns at the start of Continuous sections” in the Layout Options at File | Options | Advanced, but this option is not available in Word 2013 and 2016. If you work in Draft view, however, this will not be a problem. (For more on working with columns, see The strait and narrow: using columns.)

When you have a table divided across multiple columns, you will find that heading rows repeat at the top of each column. But you may wonder how to force table rows into the next column. If you insert a column break (Ctrl+Shift+Enter or Page Layout | Page Setup | Breaks | Column), the headings will not repeat, and there is no “Column break before” property for paragraphs. In this situation you will have to apply “Keep with next” to the rows you want to move to the next column.

If your table is very well defined and there is no possibility that you will need to add or delete rows, and if all the rows are of uniform height, you can create the appearance of a multi-column table without actually using snaking columns. Just create a table with twice as many columns as you need, plus one. Use the centermost column (with borders removed if you’re using borders on the rest of the table) as the “gutter” between your “columns” and fill the two sides of the table just as if the “table” on the right were a continuation of the one on the left.

Removing Table View In Microsoft Word For Mac 2016 Free Download

Changing your mind

Suppose you start making a simple table using tabs and are pretty far along when you realize you really need to use a Word table. You could insert a table and drag the bits of text into the cells, but Word provides an easier way: Convert Text to Table. If you already have a table set up with tabbed columns, you can select it and choose this command from the menu under the Table button in the Tables group on the Insert tab. In the resulting dialog, make sure that Word is planning to separate the text at the tabs and that the number of rows and columns it expects to make is correct. When you click OK, your tabbed table will be converted to a Word table; Word even does a pretty good job of setting column widths. You’ll still have some formatting to do (beginning with removing the automatic grid border), but it’s sure quicker than starting from scratch!

This article copyright © 2001, 2017 by Suzanne S. Barnhill. This Ribbon version is based on the original toolbar version, which benefited considerably from screen shots, technical editing, and additional detail provided by Dave Rado, webmaster of the original Word MVP site (now archived at http://wordmvp.com), when he edited this article for publication. I am also grateful to fellow Word MVPJay Freedman, who reviewed this article and made several helpful suggestions.

How to remove/delete all tables from a document in Word

Remove all tables in Word is usually applied in daily office working, and how can you quickly remove all tables? This tutorial will introduce three simple ways for you to remove all tables.

First-class tool helps you one click to remove all tables from a Word document

Generally speaking, it's easy to remove a table in Word. However, it will time-consuming and tedious to remove multiple tables one by one manually. Here, with the Remove Tables feature of Kutools for Word, you can easily remove all tables from a certain selection or the entire Word document with only one click! Click for 60-day free trial!

Kutools for Word: a powerful add-in contains 100+ tools, and it can boost 80% work efficiency in your Word daily working! Get It Now!

Recommended Productivity Tools for Word

More Than 100 Powerful Advanced Features for Word, Save 50% Of Your Time.

Bring Tabbed Editing And Browsing To Office (Include Word), Far More Powerful Than The Browser's Tabs.

Remove a table manually in Word

Actually, you can remove a table manually in Word. Please do as follow:

This method will remove one table at a time. If you need to remove all tables in bulk, please visit below VBA or Kutools.

In the Word, put cursor into the specified table to activate it, next click the cross at the top-left corer of the table to select the whole table, and then select Delete > Delete Table to remove it. See screenshot:

Note: You can also put the cursor into the specified table to activate it, and then click Layout > Delete > Delete Table to remove this table. See screenshot:

Remove all tables with VBA

It will be time-consuming to remove multiple tables one by one manually with above method. Here, this method will introduce a VBA to batch remove all table from the current Word document at once. Please do as follows:

1: Press Alt+F11 to open the Microsoft Visual Basic for Applications window;

2: Click Insert > Module, and paste below VBA code into the Module window;

VBA: Remove all tables from the current Word document

Removing Table View In Microsoft Word For Mac 2016 Manual

3: Click Run button or press F5 key to apply the VBA.

Remove all tables with Kutools for Word

Some users may not be familiar with VBA code. Take it easy! Kutools for Word's Remove Tables utility will help you remove all tables from a certain selection or the whole document at once with only one click!

Kutools for Word: a powerful add-in contains 100+ tools, and it can boost 80% work efficiency in your Word daily working! Get It Now!

Just click Kutools > Remove > Remove Tables, and all tables will be removed from the current Word document immediately.
Note: If you want to remove all tables from a certain selection, please select the part of document firstly, and then click Kutools > Remove > Remove Tables.

Relative articles:

Recommended Word Productivity Tools

Kutools For Word - More Than 100 Advanced Features For Word, Save Your 50% Time

  • Complicated and repeated operations can be done one-time processing in seconds.
  • Insert multiple images across folders into Word document at once.
  • Merge and combine multiple Word files across folders into one with your desired order.
  • Split the current document into separate documents according to heading, section break or other criteria.
  • Convert files between Doc and Docx, Docx and PDF, collection of tools for common conversions and selection, and so on...
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    The keyword For is missing from the line number 3.
    The correct code is:
    Sub Removetables ()
    Dim oTable As Table
    [b]For[/b] Each oTable In ActiveDocument.Tables
    oTable.Delete
    Next oTable
    End Sub
    • To post as a guest, your comment is unpublished.
      Thank you @anon
      It works.............
  • To post as a guest, your comment is unpublished.
    The VBA code does not work. I get 'Compile error: Syntax error'.